Comments on: HP ProLiant DL380 Quick Rails

By: will

will — Mon, 01 Jun 2009 21:55:05 +0000

I would recommend the same kit for the DL380R03 as I did for the G3, the 2UKIT-109.

By: Ronnie

Ronnie — Fri, 29 May 2009 16:14:42 +0000

Looking for a rail kit for a DL380R03 – which one will work.

By: will

will — Thu, 15 Jan 2009 15:38:19 +0000

I would recommend a 2UKIT-109. This is a Fixed Rail that will mount into most Server Racks. If you have any questions please don’t hesitate to call me.

Will Beene
903-453-0835

By: J Malone

J Malone — Thu, 15 Jan 2009 00:29:27 +0000

I found out I need G3. The server came with the inside rails mounted on it. I need the rails that go on the rack to slide the server into. If you have this could you tell me how to find the price and then how to purchase them. After I get this information I have to go to my boss and then get “the office” to purchase this. Sorry to be complicated but that’s what happens when they get the low man on the totem pole to get info.

By: will

will — Wed, 14 Jan 2009 16:24:41 +0000

What Generation DL380 is it? The DL380 line is up to the 5th Generation. The older the model the harder it is going to be to find HP rails. We have static rails that will work. P/N:2UKIT-109

http://www.racksolutions.com/rack-rails.shtml

By: J Malone

J Malone — Wed, 14 Jan 2009 02:37:33 +0000

My boss wants me to find a rail kit for a HP Proliant DL380 server. The holes are square and I believe it is a 4 post mount. What other information do I need to get to find this item? I’d like to be able to find it and get a price on it soon. The first person he asked to do this failed and I’d like to get a big ole “atta girl” if I can.

By: will

will — Mon, 02 Jun 2008 20:17:30 +0000

The DL380R01 is a 3U server that can be installed with a 2U Generic Fixed Rail: P/N 2UKIT-109. The chassis of the DL380R01 has a notch at the bottom of the chassis therefore the lower portion of the chassis will sit below the Fixed Rail.

2U Fixed Rail
http://www.racksolutions.com/rack-rails.shtml

Will Beene
Will@RackSolutions.com
903-453-0835

By: Bill Conwell

Bill Conwell — Fri, 23 May 2008 19:38:04 +0000

Hi, I have 2 DL380R01 Compaq servers that I need to find rails for. Neither server is labeled as a G1, 2, 3, 4, or 5. Just R01. They are 3U servers. Can you tell me what Rail Kit works for this server, and do you have any in stock to fit an enclosed rack with square holes?
Thanks for any help you can give me.
Bill Conwell