DL 380 Fixed Rail

  • Install a DL380 into any type of Server Rack
  • HP Quick Rail Kit is not required
  • Works with any Standard 19″ Computer Rack or Cabinet
  • Cable Management Crossbar is included


Fixed Rail Tech Specs

Equipment Depth The Rack Rails support flange is 23 1/2″ (597mm) long.
The Rack Rail will support servers computers or equipment up to 35″ (889mm) deep.
Equipment Width Maximum Equipment Width:17 5/8″ (448mm)
2U Fixed Rails Minimum Equipment Width:16 3/8″ (415.9mm)
Weight Capacity 2U Fixed Rails Maximum Equipment Weight: 75 lbs.
Equipment Mounting Rack Rails standard thumb screw threads (10-32, 12-24, and metric M6).
Construction The 2U Rack Rail is made of 0.049″ (1mm) steel with a durable zinc plating.
Cable Management Cable management bar included. Velcro straps provided for securing cables.
Hardware Includes screws, cage-nuts, and nuts for all standard rack types (see below).




More Good Stuff


Tags: ,

4 Responses to “DL 380 Fixed Rail”

  1. William Owens Says:

    We need some new rails to mount two HP DL380 in a black box square hole 19″ rack. Do you have thoses and how much would they cost.

  2. will Says:

    We have a 3rd Party Rail kit that will work. It is a fixed rail and does not slide. Its generic enough to install a wide variety of equipment into numerous types of Server Racks.

    2U Fixed Rail
    http://www.racksolutions.com/rack-rails.shtml

    Give me a call if you have any questions.
    Will Beene
    903-453-0835

  3. Debbie Says:

    I have an HP Proliant DL380 G3 server that was donated to us… I have a wall mounted rack that is 18″ in depth…the server is closer to 27″ – is there a product that I can use to make that rack work; or do I need to purchase a new rack?

    If I need to purchase a new rack, what would you suggest? I have a VERY small area to work with regarding where my computer equipment is in the office.

    Any direction is much appreciated.

  4. will Says:

    It may be possible to use a 9.7″ Conversion Bracket attached to your 18″ Wallmount Rack. This would provide 27.7″ of installation depth which would accommodate the HP Rail Kit.

    Look at P/N: 2UBRK-000C-6 on the following page.

    Conversion Brackets
    http://www.racksolutions.com/rack-mount-adapters-conversion-brackets.shtml

    Call me if you have any questions

    Will Beene
    Will@RackSolutions.com
    903-453-0835

Leave a Reply

You must be logged in to post a comment.