HP ProLiant DL140 Quick Rails
HP DL140 4Post Installation Options.
The HP ProLiant DL140 is a 1U Rackmount Server. There are currently only three generations of the DL140 which makes this one of the newer classes of HP ProLiant Servers. HP has one of the better 4Post Rail Kits. The HP Rail Kit is a very simple design that will install into most Server Racks.
| Generation | Rail Kit | Notes |
| DL140 G3 | HP Standard 1U Universal Rail Kit |
HP P/N 360104-001 Supports racks with round or square mounting holes. Adjustment range of 22.25″- 37.75″. |
| DL140 G2 | HP Standard 1U Universal Rail Kit |
HP P/N 372918-001 Supports racks with round or square mounting holes. Adjustment range of 22.25″- 37.75″. |
| DL140 G1 | HP Standard Quick-Rails |
HP P/N 348979-B21 Supports racks with round or square mounting holes. Adjustment range of 24″- 31.75″. |
Tags: DL140, HP, ProLiant, Quick Rails
August 4th, 2008 at 6:22 pm
DL140 G2 does _not_ fit 372918-001
August 5th, 2008 at 8:55 am
If you are having issues installing your DL140G2 please don’t hesitate to contact me. I’m sure that we can work through whatever issues that you are having.
Will Beene
Will@RackSolutions.com
903-453-0835
January 16th, 2010 at 9:14 am
How can I identify the G# of my unit? It does net appear to be labled.
January 19th, 2010 at 3:15 pm
It should be on the front faceplate of the server at the end of the model number
January 19th, 2010 at 9:13 pm
Thanks. It only shows DL140. I will assume that is G1.
February 10th, 2010 at 5:55 pm
Can we rack DL140 G1 and G2 using rails which originaly comes with DL140 G3?
February 11th, 2010 at 9:51 am
The G1 & G2 rails appear to be the same kit. However the G3 has a different design.
I would recommend you use a generic fixed rail: P/N 1UKIT-109
http://www.racksolutions.com/rack-rails.shtml
Call me if you have any questions
Will Beene
903-453-0835